Alarm Messages - LAVAZZA Blue LB 910 Compact Maintenance Manual For Technical Assistance

Maintenance manual for technical assistance

8.3. Alarm messages

Dosed dispensing
(programmable)
Free dispensing
(programmable)
1 2 3 MACHINE STATUS
Used capsule drawer full
Warming up
Ready
Brewing
Brewing start without
capsule loading
Full drawer reset
Handle opening
Water lack alarm
- water flow anomaly
Storing the dose into memory
Overheating alarm
Manual code 10081945 / Rel. 0.00 / February 2014
1
Status led
3
EVENTS
LEDs 2 and 3 flash alternately when the eighth capsule
is dispensed.
LEDs 1 and 3 flash alternately.
LEDs 1 and 3 steady on.
The LED corresponding to the selected button flashes
(in the example , button 1).
The LED of the selected button (in the example the button
1) alternated to the red LED flash four times. LEDs 1 and
3 come ON again to indicate that the machine is ready.
Reset completed with LED 2 and 3 steady on during 2
seconds.
LEDs 1 and 2 flash alternately.
Lack of water is detected by the machine during
dispensing and notified by LED 2 flashing.
After filling the tank, proceed as described in
"PREPARING COFFEE".
By keeping the button pressed for at least 5 seconds,
the machine save the dose into memory showing a quick
flashing frequency. Pressing the button when the desired
dose is reached, the machine saves the dispensed
amount for the next dispensing cycles.
LED 2 steady on.
Contact the service assistance.
2
2
17