Table of Contents
Advertisement
Maintenance manual for technical assistance
Environment
Components of the packing must be separated ac-
cording to the materials with which they are com-
posed and disposed of according to the waste
collection and disposal regulation in force.
5.2. Positioning
For a correct ergonomic use of the machine, place it on
a stable and perfectly horizontal surface, away from
water source, flames and heat. The area should be suf-
ficiently illuminated, ventilated, hygienic, not corrosive
and/or explosive and equipped with a power outlet rea-
dily reached with the supplied power cord. Also make
sure that the place where the machine is installed has di-
mensions and sturdiness suitable to safely support it.
For the correct operation of the machine the following
advice is given:
- room temperature: 15 °C ÷ 35 °C;
- maximum humidity: 60 %;
Warning
The machine is not suitable for outdoor installation,
and should not be exposed to weather.
Warning
The presence of magnetic fields or proximity of elec-
tric machines which generate disturbances, may
cause malfunctions in the electronic control of the
machine.
Warning
With temperatures approaching 0°C there is the risk
of freezing internal parts of the machine which con-
tain water. Do not use the machine under these con-
ditions.
Attention
Sufficient space must be allowed to access the ma-
chine and the plug, to allow the user to move freely
and to be able to immediately leave the area in an
emergency.
Manual code 10081945 / Rel. 0.00 / February 2014
6. RECOMMENDED TOOLS
A) Foolproof Torx T15 and T20 screwdrivers
B) Cross head screwdriver
C) Flat head screwdriver
D) Combination wrench (12 mm)
E) Insulated scissor
F) Long nose pliers
A
B
C
D
E
F
5
Hide quick links:
Advertisement
Table of Contents
