Maintenance manual for technical assistance
11
Manual code 10081945 / Rel. 0.00 / February 2014
8
10
12
Press on the tabs, remove the
springs and the piston assy (8) by
means of the lateral slots.
Remove the O-Ring (9).
Attention
During reassembly, apply the
special grease (see interactive
spare parts area on the site
9
http://ts.lavazza.it).
Remove the O-Ring (10).
Attention
During reassembly, apply the
special grease (see interactive
spare parts area on the site
http://ts.lavazza.it).
Attention
Replace the O-Ring (10) only after
the sleeve (11) is fitted inside the
boiler support.
Remove the O-Ring (12).
13