Table of Contents
Advertisement
Maintenance manual for technical assistance
1.3.7. List of the accessories supplied with the ma-
chine
A) Instruction booklet for using the machine
2. GENERAL SAFETY STANDARD
Attention
Failure to comply with basic safety rules and pre-
cautions could cause accidents during machine
operation and maintenance. During the repair of the
machine all the measures necessary to prevent ac-
cident must be used.
The main safety precautions that should be used when
operating the machine are described below. Lavazza
does not foresee every possible situation that could be
potentially dangerous. Warnings in this manual are not
exhaustive. If tools, procedures, working methods or te-
chniques not expressly recommended are used, make
sure that there is no risk of personal injury or injury for
other people.
Adjustments, specifications and illustrations in this ma-
nual are based on information available at the moment
of the editing and therefore can change anytime. These
modifications affect maintenance operations to be car-
ried out. Ensure that the updated version of the present
manual is being used.
Power connection must be made in compliance with the
CEI EN 60335-1 and local safety standards in force.
The electric socket connecting the machine must:
- conform with the type of plug installed on the machine,
if it is present;
- be sized in order to comply with the data provided on
the plate on the bottom of the appliance;
- be connected to ground system, efficient and in accor-
dance with the law.
Before carrying out any operation on the machine en-
sure that the plug is disconnected from the current and
that the machine is cool.
In order to avoid any electric shocks, electrical parts and
surrounding components must not :
- enter into contact with any type of liquid;
- be manipulated by humid or wet hands;
- be tampered with.
It is forbidden:
- to use the machine near flammable substances and/or
explosives and/or in an atmosphere with any risk of
fire;
- to use unoriginal spare parts (not advised by the ma-
nufacturer);
- to carry out any type of technical modification not co-
Manual code 10081945 / Rel. 0.00 / February 2014
vered in the normal procedures of diagnosis and re-
pair.
In case of fire, use carbon dioxide (CO
Do not use water or powder extinguishers.
If an operation or intervention not foreseen should be
carried out, following a different procedure than that in-
dicated in the manual, please contact Lavazza technical
service before starting.
Structural damage, modifications, tampering, alterations
or improper repairs could compromise the safety of the
machine.
2.1. Stop functions
To turn the machine off, press the on/off switch.
2.2. Safety devices
The machine/s described in this publication, are desi-
gned in compliance with the specific standards in force
(CEI EN 60335-1) and therefore have measures of pro-
tection in all the potentially hazardous parts.
Pump thermal protector: it serves to stop the machine
when the pump reaches a temperature of 120° due to
insufficient or lack of water. To restart the machine wait
4 or 5 minutes for it to cool down.
Thermal fuses: they serve to stop the machine opera-
tion if the boiler is overheated.
A Fuse on the power board.
Attention
Do not change, eliminate or by-pass the safety de-
vices in order to not cause serious risks to health
and safety.
2.3. Residual risks
The careful hazardous analysis performed, has allowed
most of the risks connected with operating and mainte-
nance machine conditions to be eliminated. Lavazza re-
minds the user that the instructions, procedures and
recommendations contained in this manual should be
strictly followed, and comply with the safety rules in
force, including the use of provided protection devices,
both integrated in the machine and individual.
This chapter illustrates the risks that the user may incur
if he does not comply with the specific safety rules as
described in this booklet.
- Do not work on the machine when it is powered.
Before carry out any operations on the machine, di-
sconnect it from the electrical network.
- Do not use water jets for washing any part of the ap-
pliance because running water can seriously damage
) extinguishers.
2
3
Hide quick links:
Advertisement
Table of Contents
