Disassembly Of Components; Disassembling The Machine Body; Manual Code 10081945 / Rel. 0.00 / February - LAVAZZA Blue LB 910 Compact Maintenance Manual For Technical Assistance

7. DISASSEMBLY OF COMPONENTS

Attention
In the machine electrical components and components that generate high temperature are installed. Be ca-
reful when the machine is operated without protection.
Safety recommendations for assembly and disassembly
Before carrying out any disassembly or assembly operation, disconnect the machine from the electrical network and
wait for the hot parts to cool.
During disassembly and assembly use clothing and/or personal protective equipment according to the laws regarding
occupational health and safety.
Dispose the used capsules and the liquid contained in the drawer for coffee grounds.
Wiring mode of electrical connections
All the wiring mechanical connections use Faston connectors with a positive lock.
If there is a Faston cap, press on the plastic as indicated in the figure and pull it.

7.1. Disassembling the machine body

1
3
6
2
4
Maintenance manual for technical assistance
Remove the complete drawer (1).
Remove the complete tank (2).
Remove the rear cover (3).
A
Lever with a screwdriver in the indi-
cated point and remove the right
panel (4).
Carry out the same operation for the
left panel.
C

Manual code 10081945 / Rel. 0.00 / February 2014