Alarm Messages On The Display - LAVAZZA LB 2500 PLUS Instructions For Use Manual

Display
LAVAZZA LB PLUS
Drawer full
LAVAZZA LB PLUS
Drawer full
WARNING
No water
WARNING
Door open
OVERHEATING
WAIT
WAIT FOR COOLING
DOWN
CREDIT
USED UP
DISPENSING
TIMEOUT
INSERT CREDIT
WARMING UP
ALARM
FAULT ON FLOW
METER
SENSOR ALARM
NEGATIVE START
PUMPS
DESCALING
REQUIRED
REPLACE SOFTENER

ALARM MESSAGES ON THE DISPLAY

Machine status
Used capsules drawer full
Drawer opened with
machine at
temperature
No water in the tank or
tank missing
Soluble element door
open
Temperature too high
Machine components
cooling down
Credit used up
Dispensing terminated
due to absence of water
flow
Insert credit, when
dispensing is by payment
and there is no credit left
Warming up has not
succeeded
Flow meter faulty,
number of pulses not
reached
Sensor alarm (shorted or
open)
Negative result on start
pumps
The machine needs
descaling of the hydraulic
circuit
The water softener filter
has exhausted its filtering
capacity
Events
Soluble drink dispensing
is possible
Not possible to
dispense
Selection buttons flashing
Not possible to dispense
Not possible to dispense
Not possible to dispense
Not possible to dispense
Incomplete product
dispensing
Not possible to dispense
Not possible to dispense
Not possible to dispense
Not possible to dispense
-
The dispensing of all
products is possible
The dispensing of all
products is possible
E N
Remedies
Empty drawer and wash it
Close the drawer
Fill the tank with non-
carbonated fresh drinking
water
Close the soluble element
door
Wait for machine to cool
down. If the message
does not disappear,
contact the service
engineers
Wait for components to
cool. If the message does
not disappear, contact
the service engineers
Reload credit
Carry out start pumps
procedure. If the message
remains or the pumps
fail to start, contact the
service engineers
Reload credit
Contact service engineers
Contact service engineers
Contact service engineers
Repeat operation. In
case of a negative result,
contact service engineers
Run the descaling cycle
as described in chapter
"Maintenance and
cleaning"
Replace the water
softener filter
35