CHAPTER – 2
2. INSTALLATION AND WIRING
2.1
Inspect the shipping container for damage. If the shipping container or cushioning material is damaged, it should be kept
until the contents of the shipment have been verified for completeness and the equipment has been checked mechanically
and electrically.
2.2
The Elexant 4010i/4020i controllers using Solid State Relays are suitable for Class 1, Division 2, Groups A, B, C, and D
hazardous areas and is IEC Ex/ATEX Zone 2 approved. Variants using EMR are suitable for
non-hazardous areas only.
Refer to the Elexant 4010i Installation Manual (H59271) and the Elexant 4020i Installation Manual (H59270) for more
details.
2.3
The figure below displays the different physical assemblies for 1-Phase (Elexant 4010i) and 3-Phase (Elexant 4020i)
variants of the unit.
1 Phase Version
3 Phase
Figure 1 - The Elexant 4010i/4020i Assembly
RAYCHEM-AR-H60624-40X0iOpsManual-EN-1905
Initial Inspection
If the shipment is incomplete or shows visible damage, notify the nearest nVent representative
Operator Safety Considerations
Elexant 4010i/4020i Assembly
Front
Top
Front
Top
nVent RAYCHEM Elexant 4010i/4020i User Manual
Bottom
Side
Bottom
Side
.
|
nVent.com
10