Table of Contents
Advertisement
CHAPTER – 5
5. GRAPHICAL USER INTERFACE
5.1
The Home Screen is the main menu for the Elexant4010i/4020i User Interface. The user can go back to the Main
Screen (see Section 5.2.1) from here, view the Information about the device or select one of the icons to view the cor-
responding functionality.
Figure 29 - Home Screen
RAYCHEM-AR-H60624-40X0iOpsManual-EN-1905
Home Screen
5.1.1
Control Setup
Figure 30 – Control Setup
Touch this icon to navigate to the Control Setup Screen. This screen allows the user to set configuration
parameters for the Temperature setpoint, Control mode, Output type, Load Shedding, and other
Miscellaneous settings. The details are covered in Section 5.4.
5.1.2
Temperature
Figure 31 - Temperature Icon
Touch this icon to navigate to the GUI screen for Temperature Sensors. In this screen, the user can
monitor the actual temperatures being read by the sensors as well as set the type of sensors being used,
the circuit tag, and the configuration for the alarms related to the temperature sensors. The details are
covered in Section 5.7.1.
nVent RAYCHEM Elexant 4010i/4020i User Manual
|
nVent.com
43
Advertisement
Table of Contents
