Connections For Analog Recording - Sony DSR-1500A Operating Instructions Manual

Connections for Analog Recording

It is possible to record analog playback signals from
another recorder or player on this unit. The following
shows connections for a system in which analog
component video signals and two channels of audio signals
are recorded between two DSR-1500A/1500AP units.
A Cable with RCA phono plugs
B 75
C Cable with XLR connectors
VIDEO OUT
DSR-1500A/1500AP (player)
a) Three 75 coaxial cables are used,
one each for Y, R Y, and B-Y.
Settings on the DSR-1500A/1500AP (recorder)
Switch/menu item
LOCAL/REMOTE switch
CH1 IN LEVEL and CH2 IN
LEVEL menu items (see page
74)
REC MODE menu item (see
page 73)
REC FORMAT menu item
(see page 67)
(not supplied)
coaxial cable
(not supplied)
(not supplied)
a)
2
2/4
AUDIO OUT
1/3
Setting
LOCAL
Normally 4 dBm
2 CHANNEL (48kHz)
(REC MODE 2CH indicator
lights.)
DVCAM
(DVCAM indicator lights.)
Notes
• This application requires the DSR-1500A/1500AP unit
used as the recorder to be fitted with the optional DSBK-
1504/1504P board.
• The DSR-1500A/1500AP units shown in the following
figure are fitted with the optional DSBK-1501 and
DSBK-1504/1504P boards.
Video monitor
Composite
video input
VIDEO
OUT
B-Y/CPST
(SUPER)
VIDEO IN
DSR-1500A1500AP
(recorder)
3
3
For details of the video/audio input and audio mode
settings, see "Settings for Recording" on page 34.
Audio input
1
2
MONITOR
AUDIO IN
2/4
1/3
Connections for Analog Recording
99