Sony DSR-1500A Operating Instructions Manual page 61

9
When the dubbing is completed, press the MENU
button to exit the menu.
If the following message appears in step 6 for an
A/V/TC/CM dubbing operation
Monitor screen
When carrying out A/V/TC/CM dubbing, if you insert the
cassettes in step 6, the cassette memory capacity of the
cassettes inserted in both this unit and the player are
checked automatically.
If the cassette memory capacity of the source tape is larger
than that of the recording tape, the above message appears.
In this case, replace the recording tape by a tape with a
larger cassette memory capacity.
If the following message appears in step 7 for an
A/V/TC/CM dubbing operation
Monitor screen
When carrying out A/V/TC/CM dubbing, if you press the
STOP button to stop dubbing in step 7, or if dubbing stops
because the source tape is longer than the recording tape,
the above message appears to confirm whether or not to
copy the contents of the cassette memory.
To copy the contents of the cassette memory, press the
SET (YES) button.
If you do not wish to copy the contents of the cassette
memory, press the RESET (NO) button. If you press the
RESET (NO) button, however, the contents of the cassette
memory may not agree with the material recorded on the
tape.
CM capacity!
Time counter display
Copy CM?
Time counter display
When the recording format of the source tape is
DV (LP)
When you carry out step 7 of the foregoing procedure, the
following messages appear.
• When the player is not the DSR-2000/2000P
During execution
Monitor screen (Example display for DSR-1500A)
After execution
Monitor screen
• When the player is the DSR-2000/2000P
During execution
Monitor screen (Example display for DSR-1500A)
Digitally Dubbing Signals in DVCAM/DV Format
SV unlocked
Time counter display
61