Sony DSR-1500A Operating Instructions Manual page 48

48
Playback
9
Press the F button to select "A PRESET."
Monitor screen
10
Press the G button.
The A PRESET MODE screen appears. The time code value of the current
point A is displayed below the screen title.
Monitor screen
11
Use the g or G button to select the digit in the time code value display that
you want to change.
Each press of the button causes the digit to the left or right to begin flashing.
Holding the button down moves the flashing digit continuously.
If you want to clear the time code value, press the RESET (NO) button. The
value is cleared to 00:00:00:00, and the leftmost digit begins flashing.
12
Press the f or F button to increment or decrement the value of the flashing
digit.
Each press of the button increments or decrements the value. Holding the
button down increments or decrements the value continuously. To change
other digits, return to step 11.
>> A preset
Time counter display