Sony DSR-1500A Operating Instructions Manual page 60

3
Press the G button.
This displays the items on level 1 of the auto mode
execution menu.
Monitor screen
4
Press the G button to display the menu level 2 for the
item "SDTI DUBBING," and select the data to be
dubbed with the F button.
Example: Selecting "A/V/TC/CM"
Monitor screen
5
Press the G button.
The following message appears.
Monitor screen
60
Digitally Dubbing Signals in DVCAM/DV Format
SDTI DUB
Time counter display
>A/V/TC/CM
Time counter display
Set tape!
Time counter display
6
Insert the source tape in the player, and the recording
tape in this unit.
A message to confirm the dubbing operation appears.
Monitor screen
To cancel the dubbing operation
Press the MENU button.
7
Press the SET (YES) button.
The tape is automatically wound back to the
beginning, and dubbing starts.
Monitor screen
To end the dubbing operation while it is in progress
Press the STOP button.
When the dubbing is completed, message
"COMPLETED" appears on the monitor screen and
"Completed" in the time counter display.
The source tape and recording tape are both
automatically rewound to the beginning, and the
cassettes ejected. When the cassette is ejected, this unit
returns to the state in step 5.
Note
If the recording format of the source tape is DV (LP),
different messages appear.
See "When the recording format of the source tape is
DV (LP)" (page 61).
8
To continue by dubbing another tape, repeat steps 6
and 7.
Start dub?
Time counter display
Executing
Time counter display