Connections For A Cut Editing System - Sony DSR-1500A Operating Instructions Manual

Connections for a Cut Editing System

The following figure shows a cut editing system
configuration that includes two DSR-1500A/1500AP units
to serve as the player and recorder.
For details of connecting devices other than the DSR-
1500A/1500AP, refer to the instruction manual for each
device.
When you select assemble or insert editing mode on the editing
control unit, the two DSR-1500A/1500AP units (recorder and
player) will automatically enter the selected editing mode.
Composite
video input
Source monitor
1
VIDEO
OUT B-Y/CPST
(SUPER)
REMOTE
DSR-1500A/1500AP
(player)
2
Audio input
3
MONITOR
SDI/SDTI
(QSDI)
OUT 1
1
REF.
VIDEO IN
PLAYER
Editing control unit (RM-450/450CE,
a)
PVE-500, etc.)
Notes
• This application requires both of the DSR-1500A/
1500AP units (recorder and player) to be fitted with the
optional DSBK-1501 board.
• The DSR-1500A/1500AP units shown in the following
figure are fitted with the optional DSBK-1501 and
DSBK-1504/1504P boards.
A 75
coaxial cable (not supplied)
B 9-pin remote control cable
(not supplied)
C Cable with RCA phono plugs
(not supplied)
Composite
video input
Main monitor
1
VIDEO
OUT B-Y/CPST
(SUPER)
SDI/SDTI
(QSDI)
IN
VIDEO OUT
Y/CPST
REMOTE
2
RECORDER
a) For the settings on the editing control unit, see
"Settings on an editing control unit" on page 97 .
Audio input
3
MONITOR
DSR-1500A/1500AP
(recorder)
Connections for a Cut Editing System
89