Sony DSR-1500A Operating Instructions Manual page 23

E Menu control section
a MENU button
b RESET (NO) button
MENU RESET(NO)
TC
SET(YES)
PRESET
a a MENU button a a
Press this button to display the menu on the monitor screen
and the time counter display. Press it again to exit the menu
display.
On how to use the menu, see Chapter 4 "Menu Settings."
b RESET (NO) button b b b
Press this button to:
• reset menu settings,
• reset the time data shown in the time counter display to
zero, or
• send a negative response to the prompts issued by the
unit.
c TC (time code) PRESET button c c c
Use this button to set the initial value of the time code
produced by the internal time code generator and user bit
data.
For details on setting an initial time code value and user
bit data, see "To set the initial time code value and user bit
data" on page 53.
d SET (YES) button d
d d
Press this button to:
• save new settings, such as selected menu items and time
code settings, to memory, or
• send a positive response to the prompts issued by the
unit.
c TC PRESET button
d SET (YES) button
e fFgG buttons
e e fFgG (arrow) buttons e e
Use these buttons to move around the menu items, and also
to modify the initial time code value and user bit data.
When the SEARCH ENABLE menu item (see page 67) is
set to ENABLE, you can also use these buttons to carry out
the following playback operations.
Playback type Direction
Playback in range Forward
±
10 times normal
Reverse
speed
Frame-by-frame Forward
playback
Reverse
Continuous Forward
playback in jog
Reverse
mode
For details on modifying the time code value, see "To set
the initial time code value and user bit data" on page 53.
Operation to carry out
Press the G button.
Press the g button.
Press the f button.
Press the F button.
Hold down the f button.
Hold down the F button.
Location and Function of Parts
23