Sony DSR-1500A Operating Instructions Manual page 35

When the REMOTE indicator is lit, selection of the time data type is carried
out at the editing control unit.
5
Select the formats of video and audio input signal to be recorded.
Use the INPUT SELECT buttons in the video/audio input setting section to
select the desired signal formats. Each selection is shown by a lit indicator
in the INPUT signal display section.
Video input signal
(input connector)
Composite signal
(VIDEO IN: Y/CPST)
Separated Y/C signal
(VIDEO IN: Y/CPST and
R Y/C)
Component signal
(VIDEO IN: Y/CPST,
R Y/C, and B Y)
SDI signal
(SDI/SDTI (QSDI) IN)
SDTI (QSDI) signal
(SDI/SDTI (QSDI) IN)
i.LINK-compatible digital
video signal in DV format
(i.DV IN/OUT)
Internal test video signal VIDEO
a) The indicators without the corresponding optional boards (DSBK-1501/1504/1504P) installed in
the unit do not light.
Audio input signal
(input connector)
Analog signal
(AUDIO IN 1/3 and
AUDIO IN 2/4)
AES/EBU signal
(AUDIO (AES/EBU) IN)
SDI signal
(SDI/SDTI (QSDI) IN)
SDTI (QSDI) signal
(SDI/SDTI (QSDI) IN)
i.LINK-compatible digital
audio signal in DV format
(i.DV IN/OUT)
Internal test audio signal CH1 1/2 and CH2 3/4
a) The indicators without the corresponding optional boards (DSBK-1501/1504/1504P) installed in
the unit do not light.
Caution
Once you have started recording, you cannot change the input signal
selection.
Corresponding INPUT Lit indicator in the
SELECT button INPUT signal display
section
VIDEO COMPOSITE in VIDEO
group
VIDEO S VIDEO in VIDEO
group
VIDEO Y R,B in VIDEO group
VIDEO SDI in VIDEO group
SDTI/i.LINK SDTI: both SDTI video
V:SDTI: only SDTI video
SDTI/i.LINK i.LINK
SG in VIDEO group
Corresponding INPUT Lit indicator in the
SELECT button INPUT signal display
section
CH1 1/2 and CH2 3/4 ANALOG in AUDIO
group
CH1 1/2 and CH2 3/4 AES/EBU in AUDIO
group
CH1 1/2 and CH2 3/4 SDI in AUDIO group
SDTI/i.LINK SDTI
SDTI/i.LINK i.LINK
SG in AUDIO group
a)
and audio input
signals are
recorded.
input signal is
recorded.
a)
35
Recording