Using The Unit As A Videocassette Recorder; Connections For Recording - Sony HVRM25AU - Professional Video Cassete recorder/player Operating Instructions Manual

Using the Unit as a Videocassette Recorder

This section describes the connections, settings and
operations necessary to perform recording on the
unit. The same settings and operations apply when
you are using the unit for dubbing.
Note
For details on connections of the player and the unit,
refer to the instruction manual of the player.
For details, see also page 65 and 66.

Connections for Recording

To video equipment without an i.LINK jack
You can connect the unit to video equipment without an
i.LINK jack. Use the unit as a recorder as follows.
Player
Connect either an S-video cable or a video cable.
46
Chapter 2 Playback and Recording
Monitor
To S-video output
To video output
To audio output
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
HVR-M25A (rear panel)
: Signal flow
Monitor