Table of Contents
Advertisement
4
Press the F button to select “TC INSERT.”
AUTO FUNCTION MENU
TC insert
SDTI DUBBING
i.LINK DUBBING
Time counter display
TC INSERT
Monitor screen
5
Press the G button.
The following message appears.
TC INSERT
Set tape!
Time counter display
INSERT THE TAPE IN
THIS VTR.
ABORT:MENU KEY
Monitor screen
Note
If the recording format is not DVCAM, a different
message appears.
See “When recording format is not DVCAM” (page
56).
6
Insert the cassette.
A message to confirm the TC insert operation appears.
TC INSERT
TC insert?
Time counter display
START TC INSERT?
START:YES
KEY
ABORT:MENU KEY
Monitor screen
To cancel the TC insert operation
Press the MENU button.
Setting the Time Data
7
Press the SET (YES) button.
Time code recording starts from the current tape
position.
TC INSERT
Executing
Time counter display
EXECUTING.
TCR 00:00:00:00
UBR 00:00:00:00
ABORT:MENU KEY
Monitor screen
Note
If the recording format of the tape is not DVCAM, a
different message appears.
See “When the recording format of the tape is not
DVCAM” (page 56).
When the recording ends, the message “TC INSERT
COMPLETED. PUSH THE YES BUTTON.” appears
on the monitor screen and “Completed” appears in the
time counter display.
8
Press the SET (YES) button to exit the menu.
When recording format is not DVCAM
When you carry out step 5 of the foregoing procedure, the
following message appears.
TC INSERT
Not DVCAM!
Time counter display
NO TC INSERT FUNCTION
AVAILABLE, DV RECORDING
FORMAT SELECTED.
SELECT DVCAM RECORDING
FORMAT.
PUSH THE YES BUTTON.
Monitor screen
Press the SET (YES) button to end the operation and do it
over again after setting the REC FORMAT menu item (see
page 67) to DVCAM. You can use the TC insert function
in DVCAM format only.
When the recording format of the tape is not
DVCAM
When you carry out step 7 of the foregoing procedure, the
following message appears.
Page 56
Hide quick links:
Advertisement
Table of Contents
