Installation, Mounting Indoor Module - REMKO EMT 100 Assembly And Operating Instructions Manual

4.2 Installation, mounting indoor
module
Installation or setting up the indoor module
Indoor module EMF Series
The wall bracket is to be attached to the wall
n
with the fasteners supplied and the indoor
module hooked onto it.
n The wall must possess sufficient load-bearing
capacity for the weight of the indoor module.
n Ensure that the wall bracket is installed level.
The indoor module can be aligned precisely by
n
means of the adjustment screws on the back of
the housing.
n The indoor module is to be mounted in such a
way that all of the sides have sufficient space
for purposes of installation and maintenance. It
is equally important that there is sufficient
space above the device for installing the safety
assembly.
Fig. 25: Wall mounting EMF 100
Indoor module EMT Series
n The indoor module must be installed on a firm,
level surface.
n The surface must possess sufficient load-
bearing capacity for the weight of the indoor
module.
n The height-adjustable feet can be used to level
the indoor module precisely .
n The indoor module is to be mounted in such a
way that all of the sides have sufficient space
for purposes of installation and maintenance. It
is equally important that there is sufficient
space above the device for installing the pipes
and the safety assembly.
Fig. 26: Floor mounting EMT 100
WARNING!
Only fasteners suitable for the given applica-
tion may be used.
27