Installation, Mounting Indoor Module - REMKO WKF-compact Series Assembly And Operating Instructions Manual

REMKO WKF / WKF-compact
2
1
3
Fig. 61: Wall breakthroughs
1: Liquid line
2: Control cable
3: Supply
4: Hot gas line
4.3 Installation, mounting
indoor module
Indoor module WKF series
n The wall bracket is to be attached to the wall
with the fasteners supplied and the indoor
module hooked onto it.
n The wall must possess sufficient load-bearing
capacity for the weight of the indoor module.
n Ensure that the wall bracket is installed level.
n The indoor module can be aligned precisely by
means of the adjustment screws on the back of
the housing.
n The indoor module is to be mounted in such a
way that all of the sides have sufficient space
for purposes of installation and maintenance. It
is equally important that there is sufficient
space above the device for installing the safety
assembly.
Fig. 62: Wall mounting WKF
58
4
Indoor module WKF-compact series
n The indoor module must be installed on a firm,
level surface.
n The surface must possess sufficient load-
bearing capacity for the weight of the indoor
module.
n The height-adjustable feet can be used to level
the indoor module precisely .
The indoor module is to be mounted in such a
n
way that all of the sides have sufficient space
for purposes of installation and maintenance. It
is equally important that there is sufficient
space above the device for installing the pipes
and the safety assembly.
Fig. 63: Floor mounting WKF-compact
WARNING!
Only fasteners suitable for the given applica-
tion may be used.