Setup Menu - Level 2; Welding Parameters In The Level 2 Setup Menu - Fronius TransPocket 150 Operating Instructions Manual

Setup menu - Level 2

Welding parame-
Parameter
ters in the level 2
Setup menu
40
Description
Software version
The full version number of the currently installed
software is spread across a number of displays
and can be retrieved by turning the adjusting dial
Automatic switch-off (time Shut down)
If the device is not used or operated for a specified
period of time, it automatically switches itself into
Standby mode
Pressing any button on the control panel will can-
cel Standby mode and the device will be ready to
resume welding
Factory setting: OFF
Fuse
For displaying/setting the fuse used
Factory setting:
- For mains voltage 230 V = 16 A
- For mains voltage 120 V = 20 A
If a fuse is set on the power source, the power
source limits the power drawn from the mains.
This prevents the circuit breaker from tripping im-
mediately
TransPocket 150 - Ratio between set fuse and welding current:
Mains voltage Set
fuse
230 V 10 A
13 A
16 A
Welding cur- TIG welding
rent electrode current
110 A 150 A
130 A 150 A
150 A 150 A
Range Unit
5 - 60 Minutes
OFF
At Amperes
230 V:
10 / 13 /
16 / OFF
(TP 180
MV only)
At
120 V:
15 / 16 /
20 / OFF
(TP 180
MV only)
Duty cycle
35%
35%
35%