Setup Menu - Level 2; Welding Parameters In The Level 2 Setup Menu - Fronius TransPocket 150 Operating Instructions Manual

Setup menu - Level 2

Welding paramet-
Parameter
ers in the level 2
Setup menu
Mains voltage
Description
Software version
The full version number of the currently installed
software is spread across a number of displays
and can be retrieved by turning the adjusting
dial
Automatic switch-off (time Shut down)
If the device is not used or operated for a spe-
cified period of time, it automatically switches
itself into Standby mode
Pressing any button on the control panel will
cancel Standby mode and the device will be
ready to resume welding
Factory setting: OFF
Fuse
For displaying/setting the fuse used
Factory setting:
- For mains voltage 230 V = 16 A
- For mains voltage 120 V = 20 A
If a fuse is set on the power source, the power
source limits the power drawn from the mains.
This prevents the circuit breaker from tripping
immediately
TransPocket 150 - Ratio between set fuse and welding current:
Set
fuse
230 V 10 A
13 A
16 A
Welding cur- TIG welding
rent electrode current
110 A 150 A
130 A 150 A
150 A 150 A
Range Unit
5 - 60 Minutes
OFF
At Amperes
230 V:
10 / 13 /
16 /
OFF
(TP 180
MV
only)
At
120 V:
15 / 16 /
20 /
OFF
(TP 180
MV
only)
Duty cycle
35%
35%
35%
39