Transport And Storage; Disposal - Partec CyFlow Cube Series Instrument Operating Manual

®
CyFlow Cube Instrument Operating Manual

Transport and Storage

For the transport of the system to a different location it will be necessary to disconnect all external data and
supply connections. In case of use with potentially bio-hazardous material, please see Partec standard
operating procedure (SOP) for decontamination. The system should be carried in upright position. During
transport or storage please take care that the system will be stored under the following conditions:
°
Temperature 5-50 C
Humidity 20-85% relative (non-condensing)
Room Clean environment, no direct sun light

Disposal

In case of product disposal, please proceed according to the Partec standard operating procedure (SOP)
for decontamination.
After decontamination, the system has to be disposed according to the local regulations and laws.
For further information, please contact your local distributor or Partec.
Rev018_2012-01-27
Warning: The Waste may contain biohazardous and carcinogenic
material from the samples (infectious material, dyes).
30/36