Table of Contents
Advertisement
Plot properties
Plot name
A default plot name (Hx, Px) is defined in the
script. Default names of the Parameters will be
displayed. The user can modify the parameter
name (line comment) enter a parameter name
better matching the experiment.
X Log On/Y Log On
This option will allow the user to change the plot's
scaling. Note that changing the scale will require
you to adapt the gains of the PMTs!
Erosion levels
The erosion level will set a threshold on the data
displayed (not the acquired data). Some of the
low frequency points will not be displayed allowing
a better visual discrimination of the higher
frequency data (signal against background).
X/Y Channel
The displayed parameters can be chosen from
the drop down menu; giving the user the list of the
activated parameters.
Mode
Graphical model for the data (line histogram, filled
area histogram, overlay,..)
BitRange
The values are ranging from 6 to 12. It sets the
channel resolution from 6 (64channels) up to 12
(4096channels).
CR-Mode
This option allows you to select the part of the
data you want to be displayed:
All events
Region only
Colour gating
®
CyFlow
Cube Instrument Operating Manual
To obtain the properties of a plot area, press the
Ctrl + right click on the plot.
Once the parameters set, the change must be
validated, the back and forth arrows will allow
you to navigate from one plot to the next.
23/36
Rev018_2012-01-27
Hide quick links:
Advertisement
Table of Contents
