Maintenance; Periodic Inspection; Service Categories; Inspection Requirements - Intercomp CS200 User Manual

Maintenance

Periodic Inspection

The crane scale and all associated adaptive devices require periodic inspection and
maintenance. The frequency and recording of the inspection requirements are set forth
in following service category classifications and are dependent on the type of service
that the equipment is used.

Service Categories

Normal Service
Crane scale is operated at less than 85% of it's capacity except for isolated instances.
Complete the frequent service inspection monthly and record the periodic service
inspection annually.
Heavy Service
Crane scale is operated at 85% - 100% of it's capacity as part of normal usage.
Complete the frequent service inspection weekly to monthly and record the periodic
service inspection semi-annually.
Severe Service
Crane scale is operated at 85% - 100% of it's capacity and used in environmental
conditions that are unfavorable, harmful or detrimental to the use of the crane scale.
Complete the frequent service inspection daily to weekly and record the periodic service
inspection quarterly.

Inspection Requirements

Frequent Service Inspection
A frequent visual inspection is completed at intervals indicated by the service category
above by the operator or designated person of the following.
1. Inspect for structural deformation, cracks or excessive wear of any part of the
crane scale or associated adaptive devices.
2. Inspect for loose or missing guards, fasteners, covers, stops, or nameplates.
3. Inspect all functional operating mechanisms and automatic hold and release
mechanisms for improper adjustments interfering with operation of the crane
scale or associated adaptive devices.
4. Inspect for distortion such as bending, twisting, or increased throat opening (if
applicable)
(records not required)
9
CS200 User Manual
Rev J, April 2018