Powercom 1000 User Manual page 2

EMC Statements
These products have been tested and thereby comply with the condition of a
Class C1 (1000VA) and Class C2 (2000VA and 3000VA), which has been
established for offering sufficient protection against dangerous interference for
installation in a residential area. Installation and use of the equipment should
comply with the instructions provided in order to avoid such interference due to
the amount of radio frequency energy that is radiated and generated by the
equipment. In spite of this, we cannot assure that a certain amount of
interference may not occur in some installations.
If, by turning on and off, it can be deduced that your radio or television
reception is found to be influenced by harmful interference from the equipment,
it is recommended to use one of the following preventive measures:
．Place the receiving antenna in a separate location or orientation.
．Ensure a greater distance is achieved between the receiver and the
equipment.
．Ensure that your equipment is connected to an outlet on a separate circuit
than the receiver.
．Contact a technician experienced with radio and TV or a dealer for
further assistance.
Declaration of Conformity Request
Units labeled with a CE mark comply with the following standards and
instructions:
．Safety: EN 62040-1
．EMC: EN 62040-2
．EMC Directive: 2014 / 30 / EU
．LVD Directive: 2014 / 35 / EU
The EC Declaration of Conformity is available upon request for products
with CE mark.
i