Lcd Control Panel - Powercom 1000 User Manual

6.4 LCD control panel

: ON/OFF
(a) Press "
(b)
While UPS is working, press
: Status or Enter
There are 10 status can be configured by user.
(a) To check the "Status" of UPS, release the "
(b) Keep pressing "
(c) "Enter" function will only be activated while settings. See more in the "
(d) If UPS idles more than 20 seconds, the display will return to main status.
: Settings or Selection
There are 7 status can be configured by user.
(a) To change the "Settings", release the "
the configurations mode of the UPS.
(b) Keep pressing "
(c) After choosing the function, press "
(d) Press "
(e) Press "
(f) Press "
(g) If UPS is idle over 10 seconds, the display will return to main status.
© All rights reserved. All trademarks are property of their respective owners.
Fig.7 Control panel
" button and hold for 3 seconds to turn on the UPS.
"
" button to see the other status
" button to see other configurations.
" button to select your options.
" button to enable your option.
" button again to confirm and enable your function.
"
button and hold for 3 seconds to turn off the UPS.
" button after holding it for 1 second.
" button after holding it for 1 second to enter
" button to enter the function.
9
" button.