LifeSpan LS Series Manual page 5

ASSEMBLY INSTRUCTIONS
After unpacking the fitness equipment, examine it carefully for possible damage. If there is any damage or there are missing parts,
please contact your retailer or an authorized repair facility for assistance.
1. Since your treadmill is a heavy piece of equipment, we recommend that after removing the box top, you slit the corners of the lower
carton and fold down the sides. This will eliminate the need to pick the treadmill over the sides of the box.
2. Prior to starting the assembly process take all the parts out of the box, remove all plastic bags, and lay them out on the floor to
become familiar with the components. Make sure that you remove all parts packaged underneath the treadmill. You may need to
slightly pick the back of the treadmill up to get better access to the parts on the bottom. You will notice that the treadmill is completely
assembled except for the handle bars and the display window. ( See FIG.1 of page 5)
31
34
Hardware
Screws already in place on the treadmill:
M8*45L(4PCS)
Screws in the plastic bag:
M8*70L(4PCS)
3
31
35
33
32
30
M4*10L(4PCS) M8*15L(2PCS)
7. Frame
8. Support post - left
9. Support post - right
10. Base frame
13. Console.
14. Complete handlebar set
15. Locking knob for folding
16. Safety key
17. PCB cable middle
18. Hand pulse cable lower
19. PCB cable upper
20. Hand pulse cable lower
21. PCB cable middle
22. PCB cable lower
23. Base frame screws x 4
24. Handlebar screws x 4
25. Console screws x 4
26. Elevation block.
27. Console bracket.
28. Screws for console position
29. Washers for console position
30. Water bottle screws x 2
31. Handrail decorating screws x 2
32. Water bottle rack
33. Water bottle holder
34. Handrail decorating cover left
35. Handrail decorating cover right
M8(2PCS) #8*15L(4PCS)
30 31
Tools:
M5(1PCS) M6(1PCS)
Parts
adjustment
adjustment