Call Procedure - Icom dPMR446 Operating Manual

3
BASIC OPERATION

Call procedure

When your system uses tone signaling, a call
procedure may be necessary prior to voice
transmission� The tone signaling employed may be
a selective calling system, which enables you to call
only specifi c stations, and prevents unwanted stations
from contacting you�
CTCSS, DTCS, Common ID must be the same on all
of your group transceiver to uses tone signaling�
1� Select a channel according to your system
operator's instructions.
 This may not be necessary, depending on the
presetting�
2� Push [S-Ring], [S-Ring/C-Ring], [Call] or
[Call/C-Ring]�
3� After transmitting, the remainder of your
communication can be carried out in the normal
way�
Selective calling Selective calling Non-selective calling
3-4
Non-selective calling