Icom dPMR446 Operating Manual page 27

5
USER SET MODE
User Set mode items (Continued)
Code Type
Sets the display format in the CTCSS tone or DTCS
code selection mode�
• Code: Displays CTCSS tone or DTCS code�
• Num: Displays CTCSS or DTCS CH No�
Power Save
Sets the Power Save function ON or OFF�
This function reduces the current drain and conserves
battery power by deactivating the receiver circuit
according to the Power Save start timers�
The Power Save function automatically starts a power
save action and reduces the consumption of the
battery charge�
• OFF: Turns OFF the function�
• Analog: To activate in the Analog mode�
• Digital: To activate in the Digital mode�
• Both: To activate in the Analog and Digital mode�
Lone Worker
Sets whether or not to automatically enter the Alert-Ring
mode when no operation occurs during the set period of
time�
5-5