Icom dPMR446 Operating Manual page 14

2
PANEL DESCRIPTION
Assignable Software Key functions (Continued)
Category: Functions
Announce
Push to turn the Channel Announce function ON or
OFF�
L You can also turn ON this function by holding down [
when you turn ON the transceiver�
AquaQuake™
While holding down this key, the AquaQuake water
draining function removes water from the speaker grill
by vibrating the internal speaker�
L Water in the speaker grill may muffle the sound coming
from the speaker�
NOTE:
• After the specified period of time, this function
automatically stops, even if a user continues to hold
down this key�
• This key works with only the internal speaker�
L You can also turn ON this function by holding down
[Up] and [ ] when you turn ON the transceiver�
Light
Push to turn ON the backlight for about 5 seconds,
even if the backlight setting is OFF�
Lock
Hold down for 1 second to turn the Key Lock function
ON or OFF�
L All assignable keys except the following are electronically
locked: [Lock], [Lock/A-Ring],
[Lock/Favorite CH Rewrite], [Lone Worker], [Monitor],
[Call], [Light], [Siren], [Surveillance], [A-Ring], [Clear],
[Call/C-Ring], [Sp� Func 1], [Sp� Func 2] and [PTT]�
You can also make or receive calls, or turn the transceiver
ON or OFF, while the Key Lock function is ON�
L When the Lock function is ON, the Lock icon is displayed�
Lock/A-Ring
z Push to enter the Lock function�
z Hold down for 1 second to turn the A-Ring function�
Lock/Favorite CH Rewrite
z Push to enter the Lock function�
z Hold down for 1 second to turn ON the Favorite CH
Rewrite function�
Lone Worker
Push to turn the Lone Worker function ON or OFF�
L If no operation occurs during a specified period, the Lone
Worker function automatically makes the transceiver
enter the Alert-Ring mode�
NOTE: To use the Lone Worker function, set the
related settings using the programming software�
L See page 4-2 for details�
My Name
Push to display the programmed "My Name�"
Siren
Hold down to emit a siren sound from the speaker
]
to let surrounding people know that you are in an
Emergency situation�
L The siren will sound continuously until the transceiver is
turned OFF�
Sp. Func 1, Sp. Func 2
Sp� Func 1 and Sp� Func 2 are reserved for PC
commands�
Surveillance
Push to turn the Surveillance function ON or OFF�
When this function is turned ON, beeps do not sound,
and the backlight and the status indicator do not light,
even when a signal is received, or a key is pushed�
User Set Mode
z Hold down for 1 second to enter the User Set mode�
The User Set mode is used to change settings,
without using a PC�
L Hold down for 1 second again to exit the User Set
mode�
z In the User Set mode, momentarily push this key to
select an item, and then push [CH Up], [CH Down],
[CH Up/Zone Up], or [CH Down/Zone Down] to
change the value or setting�
NOTE: To use the [User Set Mode] and [CH Up],
[CH Down], [CH Up/Zone Up], or
[CH Down/Zone Down] must be assigned to
assignable keys using the programming software�
2-9