ADTEK CS1-RL Operation Manual page 23

aOhs(Ao.HS): the High point is relative
aOhs
199(9
to Analogue Output high;
199(9 To set the higher display value to versus
150)0 output range high(as like as 20mA in
A4-20)
Ex. Ourput range set to be A4-20
According to
(4~20mA) is relative to display 0~199.99.
the setting
User can set the [aOhs] (Ao.HS) to be
hIsc
of
15)00. At meantime, the output signal will
be 20mA when the present value(PV) is
150.00.
aOzro(Ao.Zro): Fine Zero Adjustment
aOzro
00000
for Analog Low Output;
0 Users can get Fine zero Adjustment for
`7233 analogue output by front key. Please
connect standard meter to the terminal of
analogue output. To press the front
key(up or down key) to adjust and check
the output of meter.
aOspn(Ao.SPn): Fine Span Adjustment
aOspn
00000 for Analog high Output;
0 Users can get Fine span Adjustment for
analogue output by front key of the meter
32767
as like as [aOzro] (Ao.Zro).
ZSclr(Z.S.CLr): Clear the Fine Zero /
ZSclr
none
Span Adjustment for Analog Output
none
both
aOlmt(Ao.LMt): Analog Output High
aOlmt
11)00 Limit
11)00
10)00
Set Scaling: [ lOsc]:
Output: [ aOls]:
5)00 (Display value Low),
SCALE
[ aOhs]: 15)00 (Display value High);
[ hIsc]
[ aOlmt]:
8)00%( of Output Range)
19(99
[ aOhs]
Ao.LMt: 80.00%
15)00
10)00
[ aOls]
5)00
[ lOsc]
)00
0.00% 50.00%
CS1-RL(F) –OPERATION MANUAL(EN)-2013-01-04
Settable range: -19999~99999
Shift
Settable range: -38011~27524
Shift
Settable range: -38011~27524
Shift
Programmable:
none(None): Do not clear
aOzro(Ao.Zro): Clear low adjust
aOspn(Ao.SPn): Clear high adjust
both(both): Clear low & high
adjust
&
Settable range:
-0.00~ 110.00% of FS
)00, [ hIsc]: 19(99;
Shift
OUTPUT
100.00%
80.00%
[ aOlmt]
Up Down Enter
Up Down Enter
Up Down Enter
Selection Enter
Up Down Enter
23 / 30