Thoroughly Using The Middle Pinch Rollers - Roland TrueVIS VG2-640 User Manual

Managing the Operations Appropriately and Efficiently

Thoroughly Using the Middle Pinch Rollers

This menu lets you enable the checking function to make sure the operators who perform output will use the mid-
dle pinch rollers.
When this is set to "ENABLE", the message "SOME MID.PINCHS NOT SET RIGHT" is displayed if the user forgets to
place the middle pinch rollers during setup. Press [ENTER] to clear the message and complete the setup. Failing to
use the middle pinch rollers will cause the media feeding accuracy to drop and the media to come loose, which
will lead to a decrease in the output quality. If the message is displayed, we recommend that you raise the loading
lever and perform the setup of media again.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
M.PINCH CHECK
4.
Press [▶].
5.
Press [▲] or [▼] to select "ENABLE".
M.PINCH CHECK
DISABLE ENABLE
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "ENABLE"
210
3. Optimizing Operation Management