Roland TrueVIS VG2-640 User Manual page 271

Replacing the Blade/Separating Knife
9.
Install a new knife.
Slide the knife to align it with the groove (
10.
Slowly insert the knife into the groove.
11.
Loosen the screw.
Take care to ensure that the knife does not slip out of position at this time.
12.
Close the front cover.
13.
Press [ENTER].
When the following screen is displayed again, the blade replacement is finished.
MAINTENANCE
REPLACE KNIFE
14.
Press [MENU] to go back to the original screen.
270
4. Replacing Consumable Parts
). The knife is secured in place by the magnet ( ).