7. Check and install
the front panels.
Precondition: No refrigerant exists in the pipeline system and the power supply has been disconnected.
Step
1. Loosen the hooks
at the bottom of the
electric box and the
screws.
2. Remove the
electric box.
3. Disassemble the
gas liquid separator.
GMV5 Home DC Inverter Multi VRF Units
Assembly and disassembly of gas liquid separator
Diagram
321
●Check the parts and connecting
wires;
●If no problem is found, hook the
front panels and tighten the
screws.
Operation Instruction
●Remove the left and right front
panels and set them aside;
●Loosen the hooks at the bottom
of the electric box;
● Use a screwdriver to unscrew
the electric box.
●Disconnect internal and external
connecting wires of the electric
box.
●Protect the internal parts during
the disassembly.
●Heat up the two nozzles of
connecting pipes of gas liquid
separator with acetylene welding
and then remove the pipes.
Note: Prevent nearby parts from
being burnt during welding.