Removal Operation Of Gas Liquid Separator - Gree GMV-24WL/C-T Service Manual

GREE
Remark: Before removing the gas liquid separator, please make sure that there's no refrigerant inside the pipeline of
Process
1.Disconnect
inlet pipe and
exit pipe of gas
liquid separator
2. Replace gas
liquid separator
3. Replace
gas liquid
separator
DC Inverter Side Discharge VRF Ⅱ for North America

Removal operation of gas liquid separator

system and disconnect the power
Photo
123
Operation Instruction
● Weld those two
connection spots on
the gas liquid
separator and then
pull out the
connection pipe
Note: During welding
process, do not let
flame burn out other
parts
● Loose 4 screws
with screwdriver
● Replace gas lliquid
separator
● Weld the pipe
connected with gas
liquid separator
● Fix the screws at
the base of gas liquid
separator well again
Note: During welding
process, do not let
flame burn out other
parts