3.2 Buttons
3.2.1 Graphics of Buttons
3.2.2 Function Instructions of Buttons
No.
Name
1
Swing/Enter
2
Timer
3
Increase
7
Decrease
4
Mode
5
Function
6
Fan
8
On/Off
3 + 7
Child lock
3.3 Installation and Debugging of Wired Controller
GMV5 Home DC Inverter Multi VRF Units
Fig.2.1 Graphics of Buttons
Table 2.1 Function Instructions of Buttons
(1) Set operating temperature of indoor unit
(3) Switch among Quiet mode, Air grade, Clean grade and set the maximum
and minimum temperature under Save mode.
Switch among Auto, Cooling, Drying, Fan, Heating, Floor Heating, 3D Heating
and Warming modes. (Note: Floor Heating, 3D Heating and Warming will show
up when the unit has those functions.)
Switch among Air, Quiet, Light, Health, Absence, Save, Clean, E-heater and
Switch among Auto, Low Speed, Medium-low Speed, Medium Speed,
Medium-high Speed, High Speed and Turbo Speed.
Press and hold Increase button and Decrease button for 5 seconds to enter or
Fig.3.1 Dimension of Wired Controller
Functions
(1) Set up & down swing function
(2) Select and cancel function
Timer setting
(2) Set Timer
(4) Set and inquire parameters
X-fan functions.
Indoor unit On/Off
cancel Child Lock function.
66