Assembly And Disassembly Of Oil Separator - Gree GMV-S120WL/A-S Service Manual

6. Fix and wire the
electric box.
7. Check and install
the front panels.
Precondition: No refrigerant exists in the pipeline system and the power supply has been disconnected.
Step
1. Loosen the hooks
at the bottom of the
electric box and the
screws.
2. Remove the
electric box.
GMV5 Home DC Inverter Multi VRF Units

Assembly and disassembly of oil separator

Diagram
319
●Put the electric box back to
original position and screw it up.
●Connect all wires.
●Check the parts and connecting
wires;
●If no problem is found, hook the
front panels and tighten the
screws.
Operation Instruction
●Remove the left and right front
panels and set them aside;
●Loosen the hooks at the bottom
of the electric box.
● Use a screwdriver to unscrew
the electric box.
●Disconnect internal and external
connecting wires of the electric
box.
●Protect the internal parts during
the disassembly.