Table of Contents
Advertisement
A P P E N D I X A
Computer requirements (minimum)
P a g e A . 4
G e t t i n g
S t a r t e d
Detector
48, (31 for the Mastersizer X) amplifier parallel sample/hold construction,
electronics.
A/D conversion and on board digital storage.
Sampling time 10
detectors for the Mastersizer X.
Read in time to computer approximately 2ms.
Sampling from internal/external trigger source.
On board storage for 100 experiments.
Digital I/O interface. 12 output, 16 input lines.
Power
110/240V, 50/60Hz, 1200VA
requirements.
Dimensions.
Standard Mastersizer 1200(L) x 335(H) x 290mm (W).
Long bench Mastersizer 1853(L) x 335(H) x 290mm (W).
Weights.
Standard Mastersizer optical unit - 47 Kg.
Long bench Mastersizer optical unit - 66 Kg.
Description.
IBM-PC/AT compatible 486DX/33 or SX with Overdrive chip fitted
(minimum).
Data Capacities.
4 Mbytes total RAM Memory, (minimum).
60 Mbyte (minimum) integral hard drive, (7.1 Mbytes required for
Mastersizer software).
3.5" high density floppy disc drive.
Keyboard.
102 key standard layout with 12 function keys.
Mouse.
Microsoft Windows compatible. If a serial mouse is used note that the
Mastersizer software, by default, expects the instrument to be connected to
the COM 1 port.
Ports.
1 serial port (COM 1) for use with the Mastersizer. A second serial port is
required if you need to use a serial mouse or to control the Mastersizer and
software by a remote computer.
Parallel port for for a printer.
µ
s for all 48 detectors of the Mastersizer S, and the 31
M A N
0 1 0 1
Advertisement
Table of Contents
