Changing Print Settings; Printing From The Mastersizer - Malvern Mastersizer Series Getting Started

. Select the
Setup...
options to be changed. Refer to the Help system by selecting the
ton on this dialogue. Pay particular attention to the resolution setting.
If you have installed more than one printer make the one you will use most of the
time the default.

Changing print settings

Using the print options from the Mastersizer software has already been discussed
briefly earlier in this chapter. That information is expanded upon within this
section.
By selecting the Printer Setup dialogue box using
change which printer to use and many printer options may be changed without
returning to the Windows Control Panel. In particular:-
Page Orientation.
used. Full page graphs look best in a Landscape orientation. Changing the
page orientation may have an effect on how tables look in the Table pane.
Page Size.
may be changed. Remember you may also have to adjust the Margins set in
File - Print...
the Table pane.

Printing from the Mastersizer

Using the File-Print...
print dialogue:-
button. A dialogue box is produced that allows printer
Tables and Reports look best if Portrait orientation is
If your printer has more than one paper bin then the page size
Changing the page size has an effect on how tables look in
menu item or the Print Easy button will produce the
G E T T I N G
C H A P T E R 6
Help
File - Printer Setup... you can
P a g e 6 . 9
S T A R T E D
but-