replacing simply pull the fuse out of its holder and replace with the appropriate
fuse from the list below.
The fuse required is:
CSA applications (USA, Canada etc).
240V/110V, 1.25" 5A AS UL/CSA
Rest of the world.
240V/110V, 20mm 2A AS
#
Warning!
Failure to replace the fuses with the correct size and value may result in
hazardous operation.
Cleaning the covers
%
Caution!
The surfaces of the system may be permanently damaged if samples or
dispersants are spilt onto them. If a spillage should occur then the system
should be disconnected from the power supply before scrupulously cleaning
up the spillage.
Periodically the covers and sample area should be thoroughly cleaned using a mild
soap solution. Always ensure that the instrument is disconnected from the power
supply and computer.
. Never use excess liquid to clean the instrument and always avoid electrical
components (Connectors etc.).
. Always ensure that the instrument is completely dry before applying power.
. Never use a solvent based solution to clean the instrument as damage to the
painted surface may result.
C H A P T E R 1 1
G E T T I N G
S T A R T E D
P a g e 1 1 . 3