Mastersizer Programme Specification - Malvern Mastersizer Series Getting Started

Screen.
Printer.
Software.
The Malvern instruments warranty over the computer configuration only extends
to those supplied by Malvern Instruments. Users should be aware that not all
hardware sold as Microsoft Windows compatible is fully so. If you wish to operate
your own configuration it should be fully tested before purchase.
Malvern Instruments does not provide any warranty of software performance on
user selected computer configurations.

Mastersizer programme specification

Loading
Fully automatic with optional self starting of preprogrammed activities.
Copying
Copying restricted to end user use only. Passing on to others contravenes the
software license.
Configuration
User tells system the optical configuration which is used to scale results correctly.
Enhanced VGA monitor supporting a resolution of 800 x 600 or greater is
recommended. (The Malvern software is compatible with VGA resolution.)
High resolution printer - 300dpi or greater. Microsoft Windows compatible.
Laser or Bubble / Ink Jet type preferred. Colour printer is optional.
MS-DOS
Disc Operating System - all commands for; configuration of system,
peripherals, disc management and batch operation capabilities. Version 5.0
or later required.
Microsoft Windows
A graphical interface software that allows control of the computer and data
using simple visual metaphors. Version 3.1 or later, running in enhanced
mode is required.
Mastersizer software
All files needed to operate Mastersizer, presented as an integrated suite
with installation procedures. All Mastersizer files are contained in one
directory named by the user, further sub-directories being automatically
created.
Utilities
Presentation generator.
G E T T I N G
A P P E N D I X A
P a g e A . 5
S T A R T E D