Audio File Settings; Local Audio File Settings - Honeywell X-618 Commissioning Manual

specified IP address has been forgotten, the default IP address can be obtained by pressing
the appropriate button to reset the IP address.
7. To set the system time, click the Get button to retrieve the DCS time.
8. Click the Update button to set the DCS time manually.
9. Click the Close button to exit the Network & Time Settings window.

Audio File Settings

The audio file settings function allows users to configure the local audio files stored on the
computer as well as audio file libraries stored on other devices in the system.
To open the Audio File Settings window, following the steps below:
Click Audio Files in the subsystem area on the right side of the window, as shown in Figure 7. The
Audio File Settings window is displayed, as shown in Figure 13.
Figure 13 Audio File Settings Window

Local Audio File Settings

The local audio file settings include adding, editing and deleting local audio files.
Adding Local Audio Files
For adding local audio files, local *.wav files can be uploaded to the Local Audio Files table. Audio
files can also be added from the Audio File Library.

Adding local *.wav files
1. Click the Add button on the left side of the Audio File Settings window, as show in Figure 13.
The Add Audio File window is displayed, as shown in Figure 14.
14