Building The Configuration Data; Error Checking; Build; Communication Function - Honeywell X-618 Commissioning Manual

Building the Configuration Data

Error Checking

Check the configuration data before generating the final configuration file. Follow the directions
below to check for errors:
Select the menu command Build  Error Check. The error checking process is performed in the
background and the final configuration files are generated. If the configuration data contains errors
or conflicts, error information is displayed in the output window.

Build

Follow the directions below to build the final configuration files:
Once all of the configuration settings have been set, click the Build icon
select the menu command Build  Build. The configuration data build process runs in the
background to generate the final configuration files. If the configuration data contains errors or
conflicts, the error information is displayed in the output window.

Communication Function

The communication function of the X-618 Config software allows users to upload configuration files,
audio files, and timing data to the system devices. Follow the directions below to upload data to the
X-618 system equipment:
1. Click the
command Communication  Upload. The Upload Dialog is displayed as shown in Figure 4.
Figure 4 Upload Dialog
2. Select the content to upload.

Configuration files

Audio files

Timer
icon for uploading the configuration files on the menu bar or select the menu
on the menu bar or
7