Npm Setting - Honeywell X-618 Commissioning Manual

Figure 27 Contact Inputs Settings window
2. Double-click the contact input item to edit, the Edit Dry Contact Map window displays.
Figure 28 Edit Dry Contact Map window
3. Set the parameters as you need.

Enable/disable the port for contact input

Description

Task Type

Task
4. Click OK button to complete the contact input setting.

NPM Setting

The X-618 Config allows you to set the Device Setting, Network Setting, Play Tasks, NPM List and
Target IP address for the NPM.
To set the NPM:
1. Select the NPM node in the project column on the left of the window as shown in the Figure 7,
the Add NPM floating menu pops up.
2. Select the Add NPM, the ADD NPM window displays.
3. Set the NPM Name as you need, and click OK button. The NPM settings window displays as
shown in the Figure 29.
28