Run Environment
The X-618 Config software sends configuration data to devices within the system through the
network. The computer on which the software is installed must meet the following requirements:
Windows XP, Windows Vista or Windows 7 operating system
1GHz or higher CPU
At least 128MB of RAM
At least 1GB of available disk space
10M/100M Ethernet interface
Software Installation
The X-618 Config software is easy to install by following an installation wizard.
1.
Double-click the installation program X-618 Config.exe, and the X-618 Config installation
wizard window displays as shown in Figure 1.
Figure 1 X-618 Config Installation Wizard Page
2.
Click Next. The
3.
Select I Agree on the page.
4.
Click Next. The information page is displayed.
Read the important information on this page before proceeding to the next step.
5.
Click Next. The page shown in Figure 2 is displayed.
The default installation directory is C:\Program Files\X-618 Config. If this directory must be
changed, click Browse to choose a different destination location.
4
License Agreement page is displayed.