Tools; Help; Configuration Guide; Preparation - Honeywell X-618 Commissioning Manual

3. Click the Upload button. The software then uploads the configuration data to the selected
devices in order.
4. Click the Close button to exit the Upload Dialog.

Tools

The X-618 Config software provides a notepad tool for users to record related information.
To user the notepad tool, select Tool  Notepad.

Help

The Help menu of the X-618 Config software provides the software version information.

4 Configuration Guide

The X-618 Config software enables configuring the following settings:


Project Settings


DCS Basic Property Setting

Network & Time Settings

Audio File Settings

Play List Setting

Amplifier Setting

AVC Setting

Zone Setting

Group Setting

Play Task Setting

Key Event Setting

Contact Inputs Setting

NPM Setting

Preparation

Before configuring the system, the following must be prepared:

The X-618 system is installed, and the system connections are recorded.

Correctly connect all system devices to the 10M/100M network.

Specify the zone numbers, zone loudspeaker powers, and zone names.
Project Settings
All the settings for the X-618 system are based on the concept of a "project". A project comprises
of many subsystems. Each subsystem is a system unit that has a DCS with a power amplifier and
corresponding speaker circuits.
Every project has a unique folder for storing the related project files. Each project contains three
types of files (*.gpa, *.db and *.ldb). The project folder name is by default the project name. The
*.gpa file extension represents project files, and the *.db and *.ldb files are named after the sub-
system name.
The following procedures are related to configuring the project settings:

Creating Projects

Opening Projects
8