Zone Setting; Group Setting - Honeywell X-618 Commissioning Manual


Signal level offset (max.)

Volume adjustment factors

AVC input channel

Amplifier channels
3. Click OK button to complete the AVC settings.

Zone Setting

The zone setting function allows you to enable/disable the zones and set the Powers and
Descriptions.
To set the zones:
1. Click Zone Setting on the subsystem area on the right of the window as shown in the Figure 7,
the Zone Settings window displays as shown in the Figure 18.
Figure 18 Zone Settings Window
2. Enable/disable the zones and set the corresponding Powers and Descriptions.
3. Click OK button to complete the zone settings.

Group Setting

The Group Setting function allows you to add, edit and delete groups and edit zones.
To open the Group Settings window:
Click Group Setting on the subsystem area on the right of the window as shown in the Figure 7, the
Group Settings window displays as shown in the Figure 19.
enable
19