Basic Operations; Running The Software; Exiting The Software; Views - Honeywell X-618 Commissioning Manual

Public address and voice alarm system

Hide thumbs Also See for X-618:

Table of Contents

Note:

If you want to delete the remaining files manually, you can find and delete the X-618 Config

software folder within the installation directory.

3 Basic Operations

This chapter describes the basic operations of the X-618 Config software.

The steps for running the software are as follows:

Click Start at the lower left of your computer desktop, and select Program  X-618 Config 

X-618 Config. The Select Language window is displayed.

Select English, and click OK. The main window is displayed as shown in Figure 3.

Figure 3 X-618 Setting Software Initial Window

Select the menu commands Project  Exit to exit the X-618 Config Software.

The X-618 provides various views. The operations for setting the different views are as follows:



Select the menu command View  Full Screen to shift from non-full screen mode to full

screen mode. Select View  Full screen again to exit the full screen mode.



Select the menu command View  Project Explorer to show or hide the project area.



Select the menu command View  Output Window to show or hide the output window.



Select the menu command View  Status Bar to show or hide the status bar.

Table of Contents

Show Quick Links

Table of Contents