Page 6
2 Technical specification
This chapter gives the technical specification of the data log function of the B3100, Flow
Monitor.
NOTICE
The data log menu is accessed through the setup menu. As a result of different
options installed the menu number can vary.
2.1 Setup menu structure
M
/ M
ENU
ENU ITEM
DATALOG
LOG INT
DAILY LOG
DAILY 1
DAILY 2
TIME HMS
DATE YMD
2.2 Operational menu structure
NOTICE
The ---- in the menu name represents the sequence number of the record.
M
/ M
ENU
ENU ITEM
DATALOG
INTERVAL
----A
----B
----C
DAILY
----A
----B
----C
EVENTS
----A
----B
----C
----D
2.3 Communication
D
ESCRIPTION
Communication
USB connector
USB protocol
USB power supply
Modbus protocol
S
ETTING
Off; 5 min; 10 min; 15 min; 30 min; 1 hr; 2 hr, 4 hr; 6 hr; 8 hr.
Off; single, dual
00:00
00:00
00:00:00
00.00.00
S
ETTING
Empty or recorded interval data
Rate
Total
Accumulated total
Empty or recorded daily log data
Rate
Total
Accumulated total
Empty or recorded events
Event name
(if applicable for the event) Modbus register number
(if applicable for the event) Old setting of the Modbus register number
(if applicable for the event) New setting of the Modbus register number
S
PECIFICATION
USB (option CU), Modbus (option CB or CH)
USB-A mini
USB 2.0
Maximum 500 mA at 5 Vdc
RTU, ASCII
DSY-UM-02260-EN-01 (April 2017)
Blancett B3100 Flow Monitor, Datalogging