Table of Contents
Advertisement
1.5.
Conformal coating
Conformal coating is a protective, dielectric coating designed to conform to the surface of an assembled printed circuit
board. Commonly used conformal coatings include silicone, acrylic, urethane and epoxy. We apply only silicone on our
storages products upon requested especially by customers. The type of silicone coating features good thermal shock
resistance due to flexibility. It is also easy to apply and repair.
Conformal coating offers protection of circuitry from moisture, fungus, dust and corrosion caused by extreme
environments. It also prevents damage from those Flash storages handling during construction, installation and use, and
reduces mechanical stress on components and protects from thermal shock. The greatest advantage of conformal coating
is to allow greater component density due to increased dielectric strength between conductors.
We use MIL-I-46058C silicon conformal coating.
80000-FLD25-xxx(M/G)UH1(I)-March2011
QDFLD25‐xxx(M/G)UH1(I)
Datasheet
- 3 -
Advertisement
Table of Contents
